TS Eamcet 2019 Syllabus is here. Check revised syllabus for TS Eamcet 2019 exam. Follow TS EAMCET Syllabus 2019 and get TS Eamcet 2019 exam Pattern. Find the Telangana Eamcet 2019 syllabus weightage and get prepared for TS Eamcet exam 2019.
TS Eamcet Syllabus | Eamcet 2019 Syllabus TS
While getting ready to prepare for TS Eamcet exam, all the candidates need to know the TS Eamcet 2019 syllabus. TS Eamcet Syllabus 2019 gives a clear picture of the topics you need to prepare for TS Eamcet 2019 exam. If you have not known the Eamcet 2019 Syllabus TS, it would be really difficult for you to get through the TS Eamcet exam. TS Eamcet syllabus highlights the topics that will cover in the Eamcet exam. As an exam preparing candidate, you should be perfect in memorizing your Eamcet syllabus 2019 TS to take part in the TS Eamcet 2019 exam.
By understanding the TS Eamcet 2019 syllabus pdf, candidates can get an idea of which topics would be most important to score more marks in TS Eamcet 2019 exam. Check the TS Eamcet 2019 syllabus weightage. Through the TS Eamcet exam syllabus, it will be easy for the candidates to practice more important topics to score good marks in the TS Eamcet 2019 exam.
< TS EAMCET Hall Ticket Download >
TS Eamcet Exam 2019 Syllabus – Details
TS Eamcet 2019 Syllabus | |
Name of the Exam Conducting University | Jawaharlal Nehru Technological University, Hyderabad (JNTUH) |
Name of the Exam | Engineering Agriculture and Medical Common Entrance Test (EAMCET) |
Release of Notification | February 2019 |
Commencement of TS Eamcet Application | March 2019 |
Last Date of Application (without late fee) | April 2019 |
Ending Date of Application with late fee of Rs 500/- | April 2019 |
Last Date of Application with late fee of Rs 1000/- | April 2019 |
Ending Date of Application with late fee of Rs 5000/- | April 2019 |
Last Date of Application with late fee of Rs 10000/- | April 2019 |
Corrections in Application Form | April 2019 |
Ending Date of Application (with late fee) | May 2019 |
Availability of TS Eamcet Hall Ticket | May 2019 |
TS EAMCET 2019 Exam Date (Agriculture & Medical) | May 2019 |
EAMCET Engineering Exam Date | |
Category | Syllabus |
Answer Key Release Date | May 2019 |
Result Publishing Date | |
Last Date of Receiving Objections |
Telangana Eamcet 2019 Exam Pattern
S.No. | Name of the Stream | Name of the Subjects | No. of Questions | Maximum Marks | Exam Duration |
1. | Engineering | Mathematics | 80 | 80 | 3 Hours |
2. | Physics | 40 | 40 | ||
3. | Chemistry | 40 | 40 | ||
4. | Medical and Agriculture | Biology(Botany/Zoology) | 80 | 80 | 3 Hours |
5. | Physics | 40 | 40 | ||
6. | Chemistry | 40 | 40 |
TS Eamcet Syllabus 2019-All Streams
Eamcet 2019 TS Syllabus gives you a list of the topics that appear in TS Eamcet 2019 exam. Syllabus for TS Eamcet provides the essential information where the students try to learn the various type of concepts that going to cover in the exam.
Get the latest TS Eamcet 2019 Engineering syllabus and TS Eamcet Medical 2019 syllabus to prepare for the exam. The foremost step to get awareness of TS Eamcet question paper is to know the TS Eamcet syllabus 2019.
< Download Previous Question Papers PDF >
TS Eamcet New Syllabus 2019
TS Eamcet 2019 exam will be conducted for Engineering, Agriculture and Medical streams. The TS Eamcet syllabus will be different for three streams. Below is the list of topics that are to be covered while studying for Ts Eamcet 2019 exam.
TS Eamcet 2019 Syllabus – TS Eamcet 2019 Engineering Syllabus
Here, you can obtain the TS Eamcet 2019 syllabus for Engineering, Medical and Agriculture streams.
TS Eamcet Maths Syllabus
Units | Name of the Unit |
1. | Algebra |
2. | Trigonometry |
3. | Vector Algebra |
4. | Probability |
5. | Coordinate Geometry |
1. TS Eamcet 2019 Syllabus – Algebra
- Functions
- Types of Functions & Definitions
- Inverse Functions & Theorems
- Domain, Range, Inverse of Real-valued functions.
- Mathematical Induction
- Principle of Mathematical Induction & Theorems
- Applications of Mathematical Induction
- Problems on Divisibility.
- Matrices
- Types of Matrices
- Transpose of a matrix
- Scalar multiple of a matrix and multiplication of
matrices - Adjoint and Inverse of a matrix
- Determinants
- Inconsistency of Equations
- Rank of a matrix
- Solution of simultaneous linear equations
- Complex Numbers
- Complex number as ordered pair of real numbers & Fundamental operations
- Representation of complex numbers in the form a+ib
- Modulus and amplitude of complex numbers
- Geometrical & Polar Representation of complex numbers in Argand plane
- Argand diagram
- De Moivre’s Theorem
- Integral and Rational indices
- De Moivre’s theorem
- nth roots of unity
- Geometrical Interpretations & Illustrations
- Quadratic Expressions
- Quadratic expressions
- Sign of quadratic expressions
- Equations in one variable
- Change in signs
- Maximum and minimum values
- Quadratic Inequations.
- Theory of Equation
- The relation between the coefficients and roots in an equation
- Solving the equations when two or more roots of it are connected by certain relation
- Equation with real coefficients,
- Occurrence of complex roots in conjugate pairs and its consequences
- Transformation of equations
- Reciprocal Equations.
- Permutations and Combinations
- Fundamental Principle of counting
- Linear and Circular Permutations
- Permutations of ‘n’dissimilar things taken ‘r’ at a time
- Permutations when repetitions allowed
- Circular permutations
- Permutations with constraint repetitions
- Combinations-definitions, certain theorems.
- Binomial Theorem
- Binomial theorem for positive integral index
- Binomial theorem for rational Index (without proof)
- Approximations using Binomial theorem.
- Partial Fractions
- Partial fractions of f(x)/g(x) when g(x) contains non –repeated linear factors
- Partial fractions of f(x)/g(x) when g(x) contains repeated and/or non-repeated linear factors
- Partial fractions of f(x)/g(x) when g(x) contains repeated and nonrepeated irreducible factors only.
< Latest Employment News 2019 >
2. TS Eamcet 2019 Syllabus -Trigonometry
- Trigonometric Ratios upto Transformations
- Graphs and Periodicity of Trigonometric functions
- Trigonometric ratios and Compound Angles
- Trigonometric ratios of multiple and sub-multiple angles
- Transformations
- Sum and Product rules.
- Trigonometric Equations
- General Solution of Trigonometric Equations
- Simple Trigonometric Equations – Solutions.
- Inverse Trigonometric Functions
- To reduce a Trigonometric Function into a bijection
- Graphs of Inverse Trigonometric Functions
- Properties of Inverse Trigonometric Functions.
- Hyperbolic Functions
- Definition of Hyperbolic Function
- Graphs – Definition of Inverse Hyperbolic Functions
- Graphs – Addition formulae of Hyperbolic Functions.
- Properties of Triangles
- Relation between angles and sides of a Triangle
- Sine, Cosine, Tangent and Projection rules
- Half angle formulae and areas of a triangle
- Incircle and Excircle of a Triangle
3. TS Eamcet 2019 Syllabus -Vector Algebra
- Addition of Vectors
- Vectors as a triad of real numbers
- Classification of vectors
- Addition of vectors
- Scalar multiplication
- Angle between two non zero vectors
- Linear combination of vectors
- Component of a vector in three dimensions
- Vector equations of line and plane including their Cartesian equivalent forms.
- Product of Vectors
- Scalar Product
- Geometrical Interpretations
- orthogonal projections
- Properties of dot product
- Expression of dot product in i, j, k system
- Angle between two vectors
- Geometrical Vector methods
- Vector equations of plane in normal form
- Angle between two planes
- Vector product of two vectors and properties
- Vector product in i, j, k system
- Vector Areas – Scalar Triple Product
- Vector equations of plane in different forms
- shortest distance and their Cartesian equivalents.
- skew lines
- Condition for coplanarity of two lines
- Plane through line of intersection of two planes
- perpendicular distance of a point from a plane
- Angle between line and a plane.
- Cartesian equivalents of all these results
- Vector Triple Product – Results.
4. TS Eamcet 2019 Syallbus -Probability
- Measures of Dispersion
- Range
- Variance & standard deviation of ungrouped/grouped data
- Mean deviation
- The coefficient of variation & analysis of frequency distribution with equal means but different variances.
- Probability
- Random experiments and events
- Classical definition of probability
- Axiomatic approach and addition theorem of probability
- Independent and dependent events
- Conditional probability
- Multiplication theorem and Bayee’s theorem.
- Random Variables and Probability Distributions
- Random Variables
- Theoretical Discrete Distributions
- Binomial and Poisson Distributions.
5. TS Eamcet 2019 Syllabus – Co-ordinate Geometry
- Locus
- Definition of locus
- Illustrations -To find equations of locus
- Problems connected to it
- Transformation of Axes
- Transformation of axes
- Rules, Derivations, and Illustrations
- Rotation of Axes
- Derivations
- Illustrations
- The Straight Line
- Revision of fundamental results
- Straight line
- Normal form
- Illustrations
- Straight line
- Symmetric form
- Straight line
- Reduction into various forms
- Intersection of two Straight Lines
- Family of straight lines
- Concurrent lines
- Condition for Concurrent lines
- Angle between two lines
- Length of the perpendicular from a point to a Line
- Distance between two parallel lines
- Concurrent lines properties related to a triangle.
- Pair of Straight lines
- Equations of pair of lines passing through origin
- Angle between a pair of lines
- Condition for perpendicular and coincident lines
- bisectors of angles
- Pair of bisectors of angles
- Pair of lines
- second-degree general equation
- Conditions for parallel lines
- Distance between them, Point of Intersection of pair of lines –
- Homogenizing a second-degree equation with a first-degree equation in x and y
- Circle
- Equation of circle -standard form-center and radius of a circle with a given line segment as diameter & equation of Circle through three non-collinear points
- Parametric equations of a circle
- Position of a point in plane of a circle
- Power of a point
- Definition of tangent-length of Tangent
- Position of straight line in the plane of a circle
- Conditions for a line to be tangent
- Chord joining two points on a circle
- Equation of a tangent at a point on the circle
- Point of contact-equation of normal Chord of contact
- Pole and Polar
- conjugate points and conjugate lines
- Equation of chord with given middle point
- Relative position of two circles
- Circles touching each other externally, internally
- Common tangents
- Centers of similitude
- Equation of pair of tangents from an external point.
- System of circles
- Angle between two intersecting circles
- Radical axis of two circles properties
- Common chord and common tangent of two circles
- Radical center
- Intersection of a line and a Circle.
- Parabola
- Conic sections
- Parabola
- Equation of Parabola in standard form-
- Different forms of the parabola
- Parametric equations
- Equations of tangent & normal at a point on the parabola ( Cartesian and parametric)
- Conditions for a straight line to be a tangent.
- Ellipse
- Equation of ellipse in standard form
- Parametric equations
- Equation of the tangent and normal at a point on the ellipse (Cartesian and parametric)
- Condition for a straight line to be a tangent
- Hyperbola
- Equation of hyperbola in standard form
- Parametric equations
- Equations of tangent & normal at a point on the hyperbola (Cartesian and parametric)
- Conditions for a straight line to be a tangent
- Asymptotes.
- Three Dimensional Coordinates
- Coordinates
- Section formulae
- Centroid of a triangle and tetrahedron.
- Direction Cosines and Direction Ratios
- Direction Cosines
- Direction Ratios.
- Plane
- Cartesian equation of Plane
- Simple Illustrations.
- Calculus
- Limits and Continuity
- Intervals and neighborhoods
- Limits
- Standard Limits
- Continuity
- Differentiation
- Derivative of a function
- Elementary Properties
- Trigonometric
- Inverse Trigonometric
- Hyperbolic
- Inverse Hyperbolic Function
- Derivatives
- Methods of Differentiation
- Second Order Derivatives
- Applications of Derivatives
- Errors and approximations
- Geometrical Interpretation of a derivative
- Equations of tangents and normals
- Lengths of tangent, normal, sub
tangent and subnormal
- Integration
- Integration as the inverse process of differentiation-
- Standard forms
- properties of integrals
- Method of substitution
- Integration of Algebraic
- Exponential, logarithmic, trigonometric and inverse trigonometric functions
- Integration by parts
- Integration
- Partial fractions method
- Reduction formulae
- Definite Integrals
- Definite Integral as the limit of sum
- Interpretation of Definite
Integral as an area - Fundamental Theorem of Integral Calculus
- Properties
- Reduction formulae
- Application of Definite integral to areas.
- Differential equations
- Formation of differential equation
- Degree and order of an ordinary differential equation
- Solving differential equation by
i) Variables separable method,
ii) Homogeneous differential equation,
iii) Non – Homogeneous differential equation,
iv) Linear differential equations.
TS Eamcet Syllabus 2019 – TS Eamcet Physics Syllabus 2019
TS Eamcet Syllabus 2019 – Physical World
- What is physics?
- Scope and excitement of Physics
- Physics, technology, and society
- Fundamental forces in nature
- Gravitational Force
TS Eamcet Syllabus 2019 – Units and Measurements
- Introduction
- Measurement of Length
- The international system of units
- Estimation of Very Small Distances
- Measurement of Large Distances
- Range of Lengths
- Size of a Molecule
TS Eamcet Syllabus 2019 – Motion in a Straight Line
- Introduction
- Position, path length, and displacement
- Average velocity and average speed
- Instantaneous velocity and speed, Acceleration
- Kinematic equations for uniformly accelerated motion
- Relative velocity.
TS Eamcet Syllabus 2019 – Motion in a Plane
- Introduction
- Scalars and vectors, Position and Displacement Vectors, Equality of Vectors,
- Multiplication of vectors by real numbers,
- Addition and subtraction of vectors
- graphical method, Resolution of vectors, Vector addition
- Position Vector and Displacement, Velocity, Acceleration
- Analytical method
TS Eamcet Syllabus 2019 – Laws of Motion
- Introduction
- The law of inertia
- Aristotle’s fallacy
- Newton’s first law of motion
- Conservation of momentum
- Newton’s second law of motion
- Newton’s third law of motion, Impulse
TS Eamcet Syllabus 2019 – Work, Energy, and Power
- Introduction
- The Scalar Product
- The work-energy theorem
- Notions of work and kinetic energy
- Work
- Work Done by a variable force
TS Eamcet Syllabus 2019 – Systems of Particles and Rotational Motion
- Introduction
- What kind of motion can a rigid body have?
- Centre of mass, Centre of Gravity
- Motion of center of mass
- Angular velocity and its relation with linear velocity
- Vector product of two vectors
- Linear momentum of a system of particles
- Angular acceleration, Kinematics of rotational motion about a fixed axis
TS Eamcet Syllabus 2019- Oscillations
- Introduction
- Periodic and oscillatory motions
- Period and frequency
TS Eamcet Syllabus 2019- Gravitation
- Introduction
- Kepler’s laws
- Universal law of gravitation
- The gravitational constant
- Acceleration due to gravity of the earth
TS Eamcet Syllabus 2019 Pdf – Mechanical Properties of Solids
- Introduction
- Elastic behavior of solids
- Stress-strain curve
- Hooke’s law
- Elastic Moduli
Eamcet 2019 Syllabus TS- Mechanical Properties of Fluids
- Introduction, Pressure
- Pascal’s Law
- Variation of Pressure with Depth
- Atmosphere Pressure and Gauge Pressure
Eamcet 2019 TS Syllabus -Thermal Properties of Matter
- Introduction, Temperature, and Heat
- Measurement of temperature
- Ideal-gas equation and absolute temperature
Syllabus for TS Eamcet -Thermodynamics
- Introduction
- Thermal equilibrium
- Zeroth law of thermodynamics
- Heat, Internal Energy, and work
Syllabus for TS Eamcet 2019 – Kinetic Energy
- Introduction,
- Molecular nature of matter
- Behaviour of gases
TS Eamcet 2019 Engineering Syllabus – Waves
- Introduction
- Transverse and longitudinal waves
- Displacement relation in a progressive wave
TS Eamcet Exam Syllabus – Ray Optics and Optical Instruments
- Introduction
- Reflection of Light by Spherical Mirrors
- Refraction
- Total Internal Reflection
TS Eamcet New Syllabus – Wave Optics
- Introduction
- Conductors and Insulators
- Electric Charges
TSEamcet Syllabus – Electrostatic Potential & Capacitance
- Introduction
- Electrostatic Potential
- Potential due to an Electric Dipole
Eamcet 2019 syllabus TS -Current Electricity
- Introduction
- Electric Current
- Drift of Electrons and the Origin of Resistivity
TS Eamcet Syllabus 2019 – Moving Charges & Magnetism
- Introduction
- Magnetic Force
TS Eamcet Syllabus – Magnetism and Matter
- Introduction
- Bar Magnet
- Earth’s Magnetism
Eamcet 2016 syllabus TS–Electromagnetic Induction
- Introduction
- Experiments of Faraday and Henry
- Magnetic Flux
TS Eamcet 2019 Syllabus – Alternating Current
- Introduction
- AC Voltage Applied to a Resistor
- Phasors
TS Eamcet Syllabus 2019 – Electromagnetic Waves
- Introduction
- Displacement Current
- Electromagnetic Waves
- Electromagnetic Spectrum
Eamcet 2019 TS Syllabus – Dual Nature of Radiation and Matter
- Introduction
- Electron Emission
- Photoelectric Effect
- Experimental Study of Photoelectric Effect
- Photoelectric Effect and Wave Theory of Light
TS Eamcet Syllabus 2019 – Einstein’s Photoelectric Equation
- Energy Quantum of Radiation
- Wave Nature of Matter
- Particle Nature of Light
Eamcet 2019 Syllabus TS – Atoms
- Introduction
- Alpha-particle Scattering and Rutherford’s Nuclear Model of Atom
- Atomic Spectra
- The Line Spectra of the Hydrogen Atom
- Bohr Model of the Hydrogen Atom
- DE Broglie’s Explanation of Bohr’s Second Postulate of Quantisation
TS Eamcet 2019 Syllabus- Nuclei
- Introduction
- Atomic Masses and Size of the Nucleus
- Composition of the Nucleus
- Mass-Energy and Nuclear Binding Energy
- Nuclear Force, Radioactivity, Nuclear Energy
Syllabus for TS Eamcet – Semiconductor Electronics
- Introduction
- Classification of Materials
- Metals, Semiconductors, and Insulators
TS eamcet Exam Syllabus 2019 – Communication Systems
- Introduction
- Elements of a Communication System
- Bandwidth of Signals
- Basic Terminology Used in Electronic Communication Systems
- Propagation of Electromagnetic waves
TS Eamcet 2019 Syllabus-Telangana Eamcet Chemistry Syllabus 2019
Chapter-1: Atomic Structure
- Introduction
- Sub-atomic Particles
- Atomic Models
- Rutherford’s Nuclear model of atom
- Thomson’s Model
- Drawbacks
- Developments to the Bohr’s model of atom
- Limitations of Bohr’s model
Chapter-2: Classification of Elements and Periodicity in Properties
- Genesis of Periodic Classification
- Modern Periodic Law & present form of Periodic Table
- Electronic Configuration of Elements and Periodic Table
- Nomenclature of Elements with atomic number greater than 100
- Electronic Configuration and type of elements for s,p,d blocks
- Trends in physical properties
Chapter-3: Chemical Bonding and Molecular structure
- Kossel-Lewis approach to chemical bonding
- Octet Rule
- Limitations of Octet Rule
- Representation of simple molecules, formal charges
- Ionic or electrovalent bond
Chapter-4: States of Matter
- Intermolecular forces
- Thermal Energy
- Intermolecular forces Vs Thermal interactions
- The Gaseous State
- Ideal gas equation
- The Gas Laws
Chapter-5: Stoichiometry
- Properties of matter
- Laws of Chemical Combinations
- Atomic and molecular masses
- Concept of equivalent weight
Chapter-6: Thermodynamics
- System and Surroundings
- State of the System
- The Internal Energy as a State Function
Chapter-7: Chemical Equilibrium and Acids-Bases
- Equilibrium in Physical & Chemical process
- Dynamic equilibrium
- Law of Chemical equilibrium
- Equilibria
Chapter-8: Hydrogen and its Compounds
- Position of hydrogen in the periodic table
- Preparation and properties of Dihydrogen
- Physical Properties of Water
- Structure of Water and Ice
- Chemical Properties of Water
Chapter-9: s-Block Elements
Group-1 Elements:
- Alkali Metals
- Electronic Configurations
- Ionization Enthalpy
- Physical & Chemical Properties
- Oxides and Halides
Group-2 Elements:
- Alkaline Earth Metals
- Electronic Configurations
- Ionization Enthalpy
- General Characteristics of compounds of Alkaline Earth Metals
Chapter-10: p-Block Elements Group-13(Boron Family)
- General Introduction
- Electronic Configuration
- Ionization Enthalpy
- physical & Chemical Properties
- Atomic Radii
- Important Compounds of Carbon and Silicon
Chapter-11: p-Block Elements Group-14(Carbon Family)
- Electronic Configuration
- Atomic Radii
- Ionization Enthalpy
Chapter-12: Environmental Chemistry
- Air, Water and Soil Pollutions
- Environmental Pollution
- Tropospheric Pollution
- Atmospheric Pollution
Chapter-13 Organic Chemistry- Some Basic Principles, Techniques, and Hydrocarbons
- General Introduction
- Tetravalency of Carbon
- Shapes and Structural Representations and Nomenclature of Organic Compounds
Hydrocarbons
- Classification of Hydrocarbons
- Alkanes
- Alkenes
- Alkynes
- Aromatic Hydrocarbons
- Nomenclature and Isomerism
- Structure of Benzene
Chapter- 14: Solid State
- General Characteristics of Solid state
- Amorphous & Crystalline Solids
- Classification of Crystalline solids based on different binding forces
- Probing the structure of solids
Chapter -15: Solutions
- Types of solutions
- Expressing concentration of solutions
- Mass percentage
- Volume percentage
- Mass by volume percentage
- Parts per million
Chapter-16: Electrochemistry and Chemical Kinetics
Electrochemistry
- Electrochemical cells
- Measurement of electrode potentials
- Nernst equation-equilibrium constant
- Galvanic Cells
Chemical Kinetics
- Rate of a chemical reaction
- Factors influencing rate of a reaction
Chapter-17: Surface Chemistry
- Adsorption and absorption
- Distinction between adsorption and absorption
- Mechanism of adsorption-types of adsorption
- Characteristics of physisorption & chemisorptions
- Adsorption isotherm
- Adsorption from solution phase
Chapter-18: General Principles of Metallurgy
- Occurrence of metals
- Concentration of ores-levigation
- Froth floatation
- Magnetic separation
- Leaching
- Reduction of oxide to the metal
- Extraction of crude metal from concentrated ore-conversion to oxide
- Electrochemical principles of metallurgy
- Refining of crude metal-distillation
- Electrochemical principles of metallurgy
- Uses of aluminum, copper, zinc, and iron
Chapter-19: p-Block Elements
Group-15 Elements:
- Electronic configuration
- Atomic and Ionic Radii
- Electronegativity
- Ionization enthalpy
- Dinitrogenpreparation
- Physical and chemical properties
- properties and uses
- Oxides of nitrogen
- Compounds of nitrogen-preparation and properties of ammonia
- Preparation and properties of nitric acid
- Phosphorous
- Allotropic forms
- Phosphine-preparation and properties
- Oxoacids of phosphorous
- Phosphorous halides
Group-16 Elements:
- Elements
- Occurrence
- Electronic Configuration
- Ionization Enthalpy
- Electro Negativity
- Physical and chemical properties
- Preparation of Dioxygen, properties, and uses
- Sulphur dioxide preparation, properties and uses
- Oxoacids of Sulphur
Group-17 Elements:
- Electronic Configuration
- Electron Gain Enthalpy
- Electronegativity
- Physical & Chemical Properties
- Hydrogen chloride preparation
- Properties and uses
- Oxoacids of halogens
- Interhalogen compounds
Group-18 Elements:
- Occurrence
- Electronic configuration
- Ionization enthalpy
- Electron gain enthalpy
- Atomic Radii
- Physical and chemical properties
Chapter – 20 : d and f Elements
- Position in the periodic table
- Electronic configuration of the d-block elements
- General properties of the transition elements (d-block)
- Physical properties
- Variation in atomic and ionic sizes of transition series
- Ionization enthalpies
- Oxidation states
- Trends in the M²+/M and M³+/M²+ standard electrode potentials
Co-ordination of Compounds
- Werner’s theory of coordination compounds
- Nomenclature of Co-ordination combinations
- Stereo Isomerism
Chapter-21: Polymers
- Introduction
- Classification of Polymers
- Types of Polymerization Reactions
- Addition Polymerization
- Free Radical Mechanism
- Step-growth polymerization
- Copolymerization
- Molecular mass of polymers
Chapter-22: Biomolecules
- Carbohydrates
- Amino acids
- Proteins
- Enzymes
- Vitamins
- Nucleic Acids
- Hormones
Chapter-23: Chemistry in Everyday Life
- Drugs and their classification
- Drug-Target Interaction
- Catalytic Action of Enzymes
- Drug-Enzyme Interaction
- Different Classes of Drugs
- Chemicals in food-artificial sweetening agents
Chapter-24: Haloalkanes and Haloarenes
- Classification and Nomenclature
- Alkyl Halides & aryl halides
- Chemical Reactions
- Physical properties
- Reactions of Haloarenes
Chapter-25: Organic Compounds containing C, H, and O:
- Alcohols,
- Phenols and
- Ethers
- Aldehydes and Ketones
- carboxylic Acids
Chapter-26: Organic Compounds containing Nitrogen:
- Amines
- Diazonium Salts
- Cyanides and Isocyanides
The information which provided here for reference purpose only. Once the TS Eamcet 2019 syllabus published, we will update on this page. You can regularly visit Engg & Medical entrance exams page of RRB Recruitment for more information on other entrance exams.
Leave a Reply