Download JEE Advanced 2020 Syllabus for AAT | JEE Advanced Exam Pattern 2020 & JEE Advance Exam Syllabus

The JEE Advanced 2020 Syllabus is specified below. The JEE Advanced Syllabus 2020 Pdf Download Link is provided on this page. You can check the JEE Advance Syllabus 2020 Subject wise to prepare for the exam. Also, check JEE Advance Exam Pattern 2020 to know exam marking scheme. Moreover, read this article to know more details related to Syllabus of JEE Advanced 2020.

JEE Advanced Syllabus 2020 Subject Wise

If you have applied for JEE Advanced 2020 Exam, then you can find the JEE Advanced 2020 Syllabus from this page. Qualifying the JEE Advanced 2020 Exam is not an easy task. Thus, the candidates should check the IIT JEE Advanced Syllabus 2020 for preparing a study timetable. The students should assign more time for learning difficult topics and less time for easy topics. Also, the JEE Advance Syllabus 2020 is available in online. Hence, the students can access the JEE Advance 2020 Syllabus from anywhere at any time. Moreover, it is advised to refer the IIT JEE Syllabus 2020 after completion of a unit/ chapter. Sometime the candidate might waste his/ her time in learning the topics that are not included in the Syllabus for JEE Advanced 2020.

Also, the officials have allocated the IIT JEE Advanced Syllabus 2020 separately for Physics, Chemistry, Mathematics and Architecture Aptitude Test (AAT). Also, the candidate should check the JEE Advanced Exam Pattern 2020 from below section.

JEE Advanced Exam Important Dates 2020

JEE Advanced Exam Pattern 2020

The JEE Advanced 2020 Exam Pattern tells you the marks assigned to each subject and the marking scheme of the exam. In short, the JEE Advanced Exam Pattern 2020 reveals the structure of exam paper. Generally, the exam conducting authority designs the JEE Advanced 2020 Paper Pattern and publishes it along with the JEE Advanced 2020 Notification. Here, we are providing the JEE Advanced Test Pattern 2020 for Physics, Chemistry and Mathematics. Also, you can find JEE Advance Exam Pattern 2020 for AAT.

<< Rojgar Samachar 2020-21 >>

JEE Advance 2020 Exam Pattern for MPC

JEE Advanced Marking Scheme 2020

• The exam is conducted in online mode. That means, it is a computer-based test.
• The exam consists of Paper I & II. The candidate must attempt both the papers.
• The paper I & II includes 3 sections – Physics, Chemistry, Mathematics.
• The exam is held for 3 hours. The timings for paper- 1 is from 10:00 AM to 12:00 PM and for the paper- 2 is from 2:00 PM to 5:00 PM.
• The Questions paper consists of both multiple choice questions and numerical answer type questions.
• The question paper is available in both the English and Hindi Languages.
• And, for every correct answer, marks are awarded. And for wrong answers, marks are deducted, i.e. negative marks. Check the table above to know awarded and subtracted marks details.

JEE Advanced Paper Pattern 2020 for AAT

AAT Marking Scheme

• The AAT 2020 Exam is conducted in offline mode. That means it is a pen & paper based test.
• It contains only one paper with 3 sections, i.e. Mathematics, Aptitude Test and Drawing Test.
• The exam paper contains objective type questions and is held for 3 hours, i.e. from 09:00 AM to 12:00 PM.
• The question paper is available in the English Language.
• Now, check the JEE Advanced Syllabus of AAT from below section.

<< Download JEE Advanced Admit Card 2020 >>

IIT JEE Syllabus 2020 | JEE Advance Syllabus 2020

The candidates can check the topics & subtopics included in the Syllabus for JEE Advanced 2020. If a candidate wishes to save the jeeadv.ac.in Syllabus 2020 on their system or take a print out of it, then, click on the provided IIT JEE Advanced Syllabus 2020 Pdf Download Link. The JEE Advanced 2020 Syllabus is as follows:

JEE Advanced Syllabus 2020 for Chemistry

JEE Advanced 2020 Syllabus – Physical Chemistry

• General Topics:
  • Chemical formulae,
  • The concept of atoms and molecules,
  • Dalton’s atomic theory,
  • Concentration regarding normality, molality, molarity, and mole fraction, 
  • Calculations (based on mole concept) involving,
    • Common oxidation-reduction,
    • Neutralisation, and
    • Displacement Reactions.
  • Mole concept,
  • Balanced chemical equations.
• Nuclear chemistry:
  • Kinetics of radioactive decay (decay series excluded),
  •  Radioactivity:
    • isotopes, and
    • isobars.
  • Properties of α, β and γ rays,
  • A brief discussion on fission and fusion reactions,
  • Stability of nuclei with respect to proton-neutron ratio,
  • Carbon dating.
• Chemical Equilibrium:
  • Le Chatelier’s principle,
  • Law of mass action,
  • Common ion effect,
  • Significance of ΔG and ΔG0 in chemical equilibrium,
  • Equilibrium constant,
  • PH and buffer solutions,
  • Hydrolysis of salts,
  • Solubility product,
  • Acids and bases:
    • Bronsted, and
    • Lewis concepts.
• Energetics:
  • Pressure-volume work,
  • First law of thermodynamics,
  • Heat of reaction Second law of thermodynamics,
  • Hess’s law,
  • Internal energy,
  • Free energy,
  • work and heat,
  • Entropy,
  • Criterion of spontaneity,
  • Enthalpy,
  • Fusion and vapourization.
• Surface Chemistry:
  • Surfactants and micelles (only definitions and examples),
  • Colloids:
    • Types,
    • Methods of preparation, and
    • General properties.
  • Elementary concepts of adsorption (excluding adsorption isotherms).
  • Elementary ideas of emulsions.
• Electrochemistry:
  • Electrochemical cells and cell reactions,
  • Electrolytic conductance,
    • specific, equivalent and molar conductivity,
    • Kohlrausch’s law.
  • Faraday’s laws of electrolysis,
  • Concentration cells,
  • Electrochemical series and emf of galvanic cells,
  • Nernst equation and its relation to ΔG,
  • Standard electrode potentials.
• Solid state:
  • Ionic radii,
  • Classification of solids,
  • Packing in fcc, bcc and hcp lattices,
  • Seven crystal systems (cell parameters a, b, c, α, β, γ),
  • Crystalline state,
  • Close packed structure of solids (cubic),
  • Nearest neighbours,
  • Point defects,
  • Simple ionic compounds.
• Gaseous and Liquid States:
  • Deviation from ideality, van der Waals equation,
  • Absolute scale of temperature, ideal gas equation,
  • Law of partial pressures,
  • Kinetic theory of gases,
    • root mean square, average, and most probable velocities and their relation with temperature.
  • Diffusion of gases,
  • Vapour pressure.
• Solutions:
  • Raoult’s law,
  • Elevation of boiling point and depression of freezing point,
  • Molecular weight determination from lowering of vapour pressure.
• Chemical kinetics:
  • Order of reactions,
  • First order reactions,
  • Temperature dependence of rate constant,
    • Arrhenius equation.
  • Rate constant,
  • Rates of chemical reactions.
• Atomic Structure and Chemical Bonding:
  • Aufbau principle,
  • Bohr model,
  • Wave-particle duality,
  • Spectrum of hydrogen atom,
  • Qualitative quantum mechanical picture of a hydrogen atom,
  • Quantum numbers,
  • Electronic configurations of elements (up to 36 atomic number),
  • De Broglie hypothesis,
  • VSEPR model and shapes of molecules:
    • linear,
    • angular,
    • triangular,
    • square planar,
    • pyramidal,
    • square pyramidal,
    • trigonal bipyramidal,
    • tetrahedral, and
    • octahedral.
  • Orbital overlap and a covalent bond,
  • Uncertainty principle,
  • Hydrogen bond,
  • Shapes of s, p and d orbitals,
  • Pauli’s exclusion principle and Hund’s rule,
  • Orbital energy diagrams for homonuclear diatomic species,
  • Polarity in molecules, dipole moment (qualitative aspects only),
  • Hybridisation involving s, p and d orbitals only.

IIT JEE Advanced Syllabus – Inorganic Chemistry

• Preparation and properties of the following compounds:
  • Potassium permanganate,
  • Oxides and chlorides of tin and lead,
  • Silver oxide,
  • Oxides,
  • Chlorides and sulphates of Fe2+, Cu2+ and Zn2+,
  • Silver Thiosulphate,
  • Potassium dichromate,
  • Silver Nitrate,
  • Carbonates, bicarbonates,
  • Oxides, peroxides, hydroxides,
  • Boron:
    • Diborane,
    • Boric acid, and
    • Borax.
  • Silicon:
    • Silicones,
    • Silicates, and
    • Silicon carbide.
  • Chlorides and sulphates of sodium, potassium, magnesium and calcium
  • Aluminium:
    • Alumina,
    • Aluminium chloride, and
    • Alums.
  • Phosphorus:
    • Oxides, oxyacids (phosphorus acid, phosphoric acid), and
    • Phosphine.
  • Xenon fluorides,
  • Carbon:
    • Oxides, and
    • Oxyacid (carbonic acid).
  • Halogens:
    • Hydrohalic acids,
    • Oxides and oxyacids of chlorine,
    • Bleaching powder.
  • Nitrogen:
    • Oxides,
    • Oxyacids, and
    • Ammonia.
  • Oxygen:
    • Ozone and hydrogen peroxide.
  • Sulphur:
    • Hydrogen sulphide, oxides,
    • Sulphurous acid, sulphuric acid and sodium thiosulphate.
• Ores and minerals
  • Commonly occurring ores and minerals of
    • Copper, aluminium, zinc, silver,
    • Iron, magnesium, tin and lead.
• Principles of qualitative analysis:
  • Groups I to V,
  • Nitrate,
  • Halides (excluding Fluoride),
  • Sulphate, and
  • Sulphide.
• Isolation/preparation and properties non-metals:
  • Oxygen, sulphur,
  • Boron, silicon, halogens,
  • Nitrogen, and phosphorus,
  • Properties of allotropes of carbon (only diamond and graphite),
  • Phosphorus and sulphur.
• Extractive Metallurgy:
  • Self-reduction method (copper and lead),
  • Chemical principles and reactions only (industrial details excluded),
  • Cyanide process (silver and gold),
  • Electrolytic reduction method (magnesium and aluminium),
  • Carbon reduction method (iron and tin).
• Transition elements (3d series):
  • Colour (excluding the details of electronic transitions) and calculation of spin-only magnetic moment,
  • Definition & general characteristics,
  • Coordination compounds:
    • Nomenclature of mononuclear coordination compounds,
    • Cis-trans and ionisation isomerisms,
    • Hybridization and geometries of mononuclear coordination compounds
      • Linear, tetrahedral,
      • Square planar and octahedral.
  • Oxidation states and their stabilities.

JEE Advanced Syllabus – Organic Chemistry

• Properties and uses of some important polymers:
  • Natural rubber, Teflon,
  • Nylon, cellulose and PVC.
• Phenols:
  • Reimer-Tieman reaction,
  • Acidity,
  • Kolbe reaction,
  • Electrophilic substitution reactions,
    • halogenation, nitration and sulphonation,
• Reactions of Benzene:
  • Electrophilic substitution reactions:
    • Halogenation, nitration, sulphonation,
    • Friedel-Crafts alkylation and acylation.
  • Structure and aromaticity,
  • Effect of o-, m- and p-directing groups in monosubstituted benzenes.
• Preparation, properties and reactions of alkanes:
  • Preparation of alkanes by Wurtz reaction and decarboxylation reactions,
  • Physical properties of alkanes,
    • melting points, boiling points and density.
  • Homologous series,
  • Combustion and halogenation of alkanes.
• Practical organic chemistry:
  • Detection and identification of the following functional groups:
    • Hydroxyl (alcoholic and phenolic),
    • Carboxyl, amino and nitro,
    • Carbonyl (aldehyde and ketone).
  • Detection of elements (N, S, halogens),
  • Chemical methods of separation of mono-functional organic compounds from binary mixtures.
• Amino acids and peptides:
  • Physical properties, and
  • General structure (only primary structure for peptides).
• Properties, Preparation, and reactions of alkenes and alkynes:
  • Reduction of alkynes and alkenes,
  • Physical properties of alkenes and alkynes (boiling points, density and dipole moments),
  • Metal acetylides,
  • Addition reactions of alkynes,
  • Reactions of alkenes with KMnO4 and ozone,
  • Acid catalysed hydration of alkynes and alkenes (excluding the stereochemistry of elimination, addition),
  • Electrophilic addition reactions of alkenes with X2, HX, HOX and H2O (X=halogen),
  • The acidity of alkynes,
  • Preparation of alkenes and alkynes by elimination reactions.
• Carbohydrates:
  • Classification,
  • Glycoside formation and hydrolysis of sucrose,
  • Oxidation and reduction,
  • Mono- and di-saccharides (glucose and sucrose).

IIT JEE Advanced Syllabus for Mathematics

• Differential calculus:
  • Rolle’s theorem and Lagrange’s mean value theorem,
  • Composite functions,
  • Derivatives of polynomial, rational, trigonometric, inverse trigonometric, exponential and logarithmic functions,
  • Real-valued functions of a real variable, one-to-one, onto and into functions,
  • Tangents and normals,
  • polynomial, rational, trigonometric, exponential and logarithmic functions,
  • Derivative of a function,
  • Limit and continuity of a function & sum,
  • Difference, product and quotient of two functions,
  • Maximum and minimum values of a function,
  • Absolute value,
  • Sum, product, difference, and quotient of two functions,
  • Chain rule,
  • Even and odd functions,
  • Continuity of composite functions,
  • Intermediate value property of continuous functions,
  • Derivative of the sum, difference, product and quotient of two functions,
  • Derivatives up to order two,
  • Derivatives of implicit functions,
  • Geometrical interpretation of the derivative,
  • Increasing and decreasing functions,
  • Inverse of a function,
  • L’Hospital rule of evaluation.
• Integral calculus:
  • Integration by parts,
  • Indefinite integrals of standard functions,
  • Definite integrals and their properties,
  • Integration as the inverse process of differentiation,
  • Formation of ordinary differential equations,
  • Solution of homogeneous differential equations,
  • Application of definite integrals to a determination of areas including simple curves,
  • Fundamental theorem of integral calculus,
  • Linear first order differential equations,
  • Separation of variables method,
  • Integration by methods of partial fractions and substitution.
• Trigonometry:
  • Relations between angles & side of triangle,
  • Trigonometric functions,
    • Their periodicity and graphs,
    • General solution of trigonometric equations,
    • Addition and subtraction formulae,
    • Formulae involving multiple and sub-multiple angles.
  • Inverse trigonometric functions (principal value only),
  • Half-angle formula & area of triangle,
  • sine rule and cosine rule.
• Analytical geometry:
  • Two Dimensions,
  • Three Dimensions.
• Vectors:
  • Dot and cross products,
  • Addition of vectors,
  • Scalar triple products and their geometrical interpretations,
  • scalar multiplication.
• Algebra:
  • Algebra of complex numbers,
  • Addition, multiplication,
  • Triangle inequality,
  • Arithmetic, geometric and harmonic progressions & means,
  • Properties of modulus and principal argument,
  • Quadratic equations with real coefficients,
  • Relations between roots and coefficients,
  • Computation of probability of events using permutations and combinations,
  • Formation of quadratic equations with given roots,
  • Sums of finite arithmetic and geometric progressions,
  • Infinite geometric series,
  • Cube roots of unity, geometric interpretations,
  • Independence of events,
  • Permutations and combinations,
  • Binomial theorem for a positive integral index,
  • Symmetric functions of roots,
  • Properties of binomial coefficients,
  • Conditional probability, Bayes Theorem,
  • Multiplication & addition by scalar and product of matrices,
  • Transpose of a matrix,
  • Matrices as a rectangular array of real numbers,
  • Diagonal, symmetric and skew-symmetric matrices and their properties,
  • Determinant of a square matrix of order up to three,
  • Properties of these matrix operations,
  • Equality of matrices,
  • Inverse of a square matrix of order up to three,
  • Solutions of simultaneous linear equations in 2 or 3 variables,
  • Logarithms and their properties,
  • Addition and multiplication rules of probability,
  • Conjugation, polar representation,
  • Sums of squares and cubes of the first n natural numbers.

<< Download JEE Advanced Previous Papers >>

JEE Advanced Physics Syllabus 2020

• Electricity and magnetism
• Mechanics
• Optics:
  • Thin lenses,
  • Rectilinear propagation of light,
  • Wave nature of light:
    • Huygen’s principle,
    • interference limited to Young’s double-slit experiment.
  • Magnification,
  • Deviation and dispersion of light by a prism,
  • Reflection & refraction at plane and spherical surfaces,
  • Total internal reflection,
  • Combinations of mirrors and thin lenses.
• Thermal physics:
  • First law of thermodynamics and its applications (only for ideal gases),
  • Calorimetry, latent heat,
  • Blackbody radiation:
    • absorptive and emissive powers.
  • Wien’s displacement law, Stefan’s law,
  • Kirchhoff’s law,
  • Heat conduction in one dimension,
  • Ideal gas laws,
  • Elementary concepts of convection and radiation,
  • Isothermal and adiabatic processes, bulk modulus of gases,
  • Thermal expansion of solids, liquids and gases,
  • Equivalence of heat and work,
  • Newton’s law of cooling,
  • Specific heats (Cv and Cp for monoatomic and diatomic gases).
• Modern physics:
  • Atomic nucleus,
  • α, β and γ radiations,
  • Law of radioactive decay,
  • Decay constant,
  • Half-life and mean life,
  • Binding energy and its calculation,
  • Fission and fusion processes,
  • Energy calculation in these processes,
  • Photoelectric effect,
  • Bohr’s theory of hydrogen-like atoms,
  • Characteristic and continuous X-rays, Moseley’s law,
  • De Broglie wavelength of matter waves.

JEE Advanced Syllabus for AAT (Architecture Aptitude Test)

• Imagination and aesthetic sensitivity:
  • Context mapping,
  • Composition exercise with given elements,
  • Sense of colour grouping or application,
  • Creativity check through an innovative uncommon test with familiar objects.
• Freehand drawing:
  • This includes drawing objects in their right form and proportion, relative location, surface texture and details of its components in appropriate scale.
• Three-dimensional perception:
  • Understanding of three-dimensional forms with building volume, colour, elements, and orientation. By structuring objects visualize it in memory.
• Geometrical drawing:
  • Drawing lines, quadrilaterals, angles, polygons, triangles, circles, etc.
  • Study of plan (top view), elevation (front or side views) of solid objects like cylinders, prisms, splayed surface holders, cones, cubes, etc.
• Architectural awareness:
  • General awareness of National & International famous architectural creations, places, architects, designers, etc.

IIT JEE 2020 Advanced Syllabus Pdf

About JEE Advanced Exam

The Indian Institute of Technology, Kanpur is conducting the Joint Entrance Examination (JEE Advanced) in this year. And, the Joint Seat Allocation Authority takes care of counselling process. It is a National Level Entrance Exam and is conducted once in every year. It is a computer-based test except for AAT Test. The candidates who wish to get admissions in National Wide reputed Institutes/ Universities such as IITs, NITs, IIITs etc. can write this exam. After registering for the exam, check the JEE Advanced Syllabus 2020 Topic Wise from above to crack the test.

To know more details related to State and National Level Entrance Exams book our RRB Recruitment page.